|
|
|
iPrism Knowledgebase June 22, 2010 ADM191.htm
|
|
|
|
iPrism Knowledgebase June 22, 2010 ADM191.htm
|
Checking NIC Speed and Duplex Settings |
To verify that iPrism NICs are both set to Full-Duplex in Bridge-Mode for optimized traffic handling, do the following:
From System Diagnostics → Self-check tab:
Click Run (allow a few minutes for the diagnostic report to display in the window)
Look for the Interface Configuration section for active NICs and related speed and duplex settings.
ADM191a - Interface Configuration Section of Self-Check
Note: Using the console port, menu item #10 will display similar information.